This high-performance finish has remarkable adhesive qualities, blackmark, abrasion, and scuff-resistance

It's scrubbable, buffable, and wears extremely well

I for use in traditional as well as high-speed and ultra high-speed programs

Use it on vinyl asos, asphalt, and rubber tile, linoleum, terrazzo, aggregate, quarry tile, brick, concrete, sealed wood, and parquet

Directions : Note: Apply with a prewashed, good quality string mop or wax applicator

Be sure mop has not been contaminated with cleaners or strippers

Initial Application: 1

Strip all old wax/finish with a good quality product, and rinse floor thoroughly

Allow floor to dry completely

2

Apply two (2) coats of finish allowing 30-40 minutes drying time between applications

When using as a foundation for high-speed and ultra high-speed programs, apply additional coats to create a long-lasting base

Maintenance: 1

Sweep and/or dust mop daily

Damp mop daily or as needed

2

For high-speed and ultra high-speed maintenance programs, mop or scrub weekly (or more often) using the renovator product, allow to dry to a haze then burnish to a high-shine

Spray Buffing: Use a prepared spray buff compound for efficient, economical, spectacular results

Stripping: Use a good quality alkaline or ammoniated stripper

1 gallon of Matchless will cover approximately 2500 sq

ft

with 1 coat